Anti-fouling ISD-400 is a strong anti-foaming agent and a very active foaming agent that permanently and permanently releases the process from the floor that interferes with it.
|Chemical base||Fatty acid|
|Volumetric mass at 20 ° C||8 - 6|
|Flash point||150 ° C|
|Solubility in water||Completely soluble|
The amount of its use should be determined in relation to its minimum concentration of concentration per system. This anti-foam can be used both as emulsion (slurry) and as a manufactured material. If used as an emulsion (diluted), we can mix a part of the anti foam with 3 parts of hot water (in cold seasons) or cold water (in the warm season). The amount of consumption can be determined by a pump (a dosing pump) or a drip tray. In most cases, this anti-foam is added in direct condition to the fossil material, but it is recommended that for continuous use Use the measurement pump. The amount consumed greatly depends on the nature and amount of bulk material, and is from 2 to 100, respectively.
- It can be stored in a barrel in a package at temperatures above 15 ° C for 12 months.
- Protect from freezing and keep it warm in the cold seasons before use.
- At relatively cold temperatures, a thin deposition layer may be present in the product.
Barrels are 30 and 60 liters.